Civil Engineer (Hydraulics), US Army Corps of Engineers
Job Description :
Duties
Coordinates and consults with other District offices on the gathering and preparation of data for development of hydrodynamic and sediment transport models.
Provides expert recommendations for the conduct of special wind, wave, erosion and accretion studies.
Undertakes the design of navigation channels, sediment traps, floodwalls, levees, tidegates, backfills, jetties, breakwaters and groins and seawalls.
Develops procedures and standards to be used by others for wetland restoration, navigation improvements, shoreline protection and beach erosion control.
Directs section and unit engineers engaged in developing designs for projects along coastal areas, inlets and estuarine environments.
Plans and schedules work, directs employees, establishes priorities and periodically evaluates program activities to ascertain if program objectives are being met.
Establishes methods and procedures for effective accomplishment of work and reviews and approves completed work.
Candidate Requirements :
Requirements
Conditions of Employment
Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
Incumbent is required to possess a valid state driver's license.
Incumbent must obtain a Facilities Engineering (FE) Level II certification within 24 months from the start of employment.
This position requires possession of an active Professional Engineering (PE) license issued by any State in the United States, the District of Columbia, Guam or Puerto Rico.
Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

Interagency Career Transition Assistance Plan
Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible



In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Requirements for Civil Engineer (Hydraulics), GS-13:

Basic Requirement for Civil Engineer (Hydraulics):

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes 1) conducting studies on the littoral cell characteristics; 2) developing modeling techniques to evaluate coastal processes; 3) determining optimum means for shoreline protection, AND; 4) conducting dredging and dredged material management analysis.

AND

Selective Placement Factor: This position requires the possession of an active Professional Engineering (PE) License issued by any State in the United States, the District of Columbia, Guam, or Puerto Rico.


You will be evaluated on the basis of your level of competency in the following areas:


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-12).
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information
Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
You will be required to provide proof of U.S. Citizenship.
Two year trial/probationary period may be required.
Direct deposit of pay is required.
Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
This is a Career Program (CP) 18 - position
You may claim military spouse preference (MSP).
If a MSP applicant is determined best qualified and selected, placement must be at the full performance level for priority consideration.
Multiple positions may be filled from this announcement.
Salary includes applicable locality pay or Local Market Supplement.
Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
Relocation/Recruitment incentive may be authorized.
Job Location :
New Orleans, LA
Job Position :
Civil Engineer (Hydraulics)
Job Type :
  • Not Specified
  • Not Specified
Job Specialization :
  • Hydrosystems Engineering
  • Not applicable
  • Not applicable
Job Salary :
$102,285 - $132,974 per year
Contact :
Website https://portal.chra.army.mil/hr_public?id=app_inq Address KC-APF-W2ST03 US ARMY ENGINEER DIST, SAN FRANCISCO DO NOT MAIL Sacramento, CA 98134 US
More Information :
Required Documents
The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc). Please review the following links to see which documents you need to provide to prove your eligibility to apply: Applicant Merit Checklist and Proof of Eligibility.

As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.

1. Your resume:

Your resume may be submitted in any format and must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application will be marked as incomplete and you will not receive consideration for this position.
For additional information see: What to include in your resume.

2. Other supporting documents:
Cover Letter, optional
Most recent Performance Appraisal, if applicable
Proof of Eligibility to Apply: Your application must include the documents which prove you are eligible to apply for the vacancy. The Proof of Eligibility document describes authorities commonly used in merit promotion recruitment and what document(s) are required to prove you meet the requirements of the authority. You must meet the requirements of at least one of the authorities listed in the Who May Apply section above to receive further consideration.
Time-in-grade documentation: If you are applying for a higher grade and your SF-50 has an effective date within the past year, it may not clearly demonstrate you meet the one year time-in-grade requirement so you will need to provide an SF-50 which clearly demonstrates you meet the time-in-grade requirements (examples of appropriate SF-50s include Promotions, Within-grade Grade/Range Increases, and SF-50s with an effective date more than one year old).
This position requires a job-related license or certification. You MUST submit a copy of your license or certification with your application package or you will be rated ineligible. See: Transcripts and Licenses
NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility.
Date Posted :

12-22-2021